Sediment movement under unidirectional flows: an assessment of empirical threshold curves   总被引：1，自引：0，他引：1  

D. Paphitis 《Coastal Engineering》2001,43(3-4)

A selection of threshold data sets from previous investigations is used to re-examine, selectively, some of the empirical curves that are most commonly used for the prediction of sediment threshold. Simple analytical formulae are derived describing single line curves for mean threshold values and envelopes for the initial movement of discrete particles and the commencement of mass sediment transport phases of the critical condition.The complexity of factors governing the prevailing conditions at threshold, together with the randomness of events, limits deterministic solutions; however, the curves provide an approach that can be used readily in practical applications. In contrast, the envelope presentation is more of a stochastic approach to the definition of threshold. It recognises that there is no definitive threshold condition under which a particular particle size can be displaced, but rather that a range of threshold values exist.The empirical threshold relationships were derived on the basis of a relatively large amount of data. However, the sources utilised have interpreted the ‘critical condition’ in various ways, implying that the formulae must be treated with caution in applications.  相似文献   

Bowen数和东中国海Bowen数分布     

张淮水  汪园祥  楼顺里 《中国海洋大学学报(自然科学版)》1988,(3)

本文讨论Bowen数的意义、功能和计算法。同时,依据多年水文气象实测资料作统计,计算出东中国海的Bo值。其结果绘制成1月至12月的月平均分布图,从而对本海域的Bo分布特点作详细分析介绍。  相似文献   

基于强跟踪性能的QEKF组合导航自适应滤波研究     

夏琳琳  赵琳  程建华 《测绘学报》2008,37(4):410-417

以低成本陆用航姿参考系统（AHRS）/GPS紧耦合系统为研究对象,建立了基于伪距、伪距率、航向角的组合观测数学模型。引入强跟踪滤波（STF）算法,利用渐消因子的作用,增强滤波器对状态快速变化的跟踪能力。同时,针对微惯性器件漂移过大的缺点,采用二阶EKF（QEKF）方法,通过对Hessian矩阵的求解,补偿系统观测方程线性化的二阶截断误差。仿真表明：STQEKF方法可高速准确地逼近系统非线性模型,实现陆地载体导航控制,在传感器精度有限的情况下,使姿态和位置的控制效果较标准EKF分别提高了约8.9%-38.2%和48.7%-54.4%  相似文献   

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited     

J A Vargas-Guzmán 《中国地质大学学报(英文版)》2008,19(1):85-92

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.  相似文献   

In-flight geometric calibration of different cameras of IRS-P6 using a physical sensor model   总被引：2，自引：1，他引：1  

P. V. Radhadevi    S. S. Solanki 《The Photogrammetric Record》2008,23(121):69-89

  相似文献   

鲁北平原区井灌回归系数分析     

玉洪超  聂庆林  聂秋月  刘新征 《地下水》2008,30(3):17-20

利用井灌回归系数计算回归补给水量,是地下水资源评价计算井灌回归水量的基本方法。井灌回归系数确定的合理与否,直接影响到地下水资源评价成果的合理性。以试验站的观测资料为基础,结合引水灌溉调查成果,对影响井灌回归系数大小的因素和区域分布规律进行了系统分析,依地下水埋深和灌溉方式划分引黄灌区、井河结合灌区、井灌区三种类型,分析确定鲁北平原区适用的井灌回归系数。  相似文献   

高温高压岩石流变仪的围压标定方法     

党嘉祥  周永胜  何昌荣  闫小兵 《地学前缘》2008,15(3):287-291

高温高压岩石流变仪围压标定的主要方法为氯化盐类的部分熔融法和矿物相变法。利用氯化盐类进行压力标定时,不仅可以利用单一盐类,也可以使用多种盐类的混合物;常用的压力标定矿物相变及其适用温压范围如下:石英-柯石英,500~1200℃、2.5~3.2GPa;钠长石-硬玉+石英,600~1200℃、1.6~3.2GPa;铁橄榄石+石英-铁辉石,600~1200℃、1~1.7GPa;磷镁石-Mg3(PO4)2-Ⅱ,565~825℃、0.6~0.9GPa;方解石-文石,600~1200℃、0.5~2.5GPa。不同的标定方法具有不同的特征,文中将进行详细介绍。  相似文献   

非量测数码影像在航测成图中的应用     

郑福海  刘倩  王铁军 《测绘与空间地理信息》2008,31(5)

如何加速成图周期,快速、高效地生产各种地理信息产品是摄影测量应用研究的主要内容.本文介绍了非量测数码航摄影像在全数字摄影测量工作站上进行地理信息产品生产的技术方法和工作流程,研究了关键技术环节.  相似文献   

三维地震属性参数在煤层厚度预测中的应用     

胡宗正  ;郭良红  ;林建东 《中国煤炭地质》2008,(6):56-58

依托“西部煤炭资源高精度三维地震勘探技术”项目工程,对晋城某矿南翼大巷东南区5m×5m×1ms的三维地震数据体,采用三维地震属性参数预测煤层厚度及其变化规律：沿3煤层、15煤层10ms时窗提取地震属性42种,根据钻孔资料,计算出煤厚与地震属性相关系数;从中优选出相关系数大于0．35的地震属性,其中3煤层9个、15煤层10个;然后进行地震属性互相关分析,优选出与3煤、15煤层厚度相关系数较大的4种属性,建立预测煤厚的BP神经网络模型,分别选取3煤层12个、15煤层4个实测数据作为学习训练和测试样本,以钻孔地震属性作为学习样本,对网络进行训练,最终获得全区煤层厚度。经与预留钻孔成果资料对比,预测精度较高,结果可用。  相似文献   

松辽盆地宋芳屯油田扶杨油层孔隙结构及其影响因素     

胡霞  黄得利  李照勇 《上海国土资源》2008,(1):60-62

通过镜下观察,宋芳屯油田扶杨油层孔隙类型较多,以粒间孔为主。细管压力曲线上看,曲线较陡,分选差,孔隙结构特征参数总体上较差,与孔隙度、渗透率有一定的关系,大的孔隙对渗透率的贡献最大。扶杨油层的孔隙结构较复杂主要由于成岩作用影响,压实作用使孔隙空间显著缩小,胶结作用和自生粘土矿物生长使孔隙进一步缩小和复杂化,后期的溶蚀作用使孔隙空间增加。  相似文献